namespace Uninpho.DBOperation.Model
{
    public class Assist_xxxwcsvdata
    {
        public string Id ="唯一标识";
        public string Listid = "对应的list表的uuid";
        public string Cld = "主要参数——测量点";
        public string Gzidh = "主要参数——轨枕ID号";
        public string Nc = "横杠采点——内插";
        public string Lc = "横杠采点——里程";
        public string Gc = "理论调整量-与设计差——高程";
        public string Pmwz = "理论调整量-与设计差——平面位置";
        public string Spcg = "理论调整量-与设计差——水平/超高";
        public string Gj = "理论调整量-与设计差——轨距";
        public string Gddhdb = "高低——点号：短波";
        public string Gddb = "高低——高低【短波5m】";
        public string Gddhcb = "高低——点号：长波";
        public string Gdcb = "高低——高低【长波150m】";
        public string Gxdhdb = "轨向——点号：短波";
        public string Gxdb = "轨向——轨向【短波5m】";
        public string Gxdhcb = "轨向——点号：长波";
        public string Gxcb = "轨向——轨向【长波150m】";
        public string Dxg = "导向轨";
        public string Zggc = "调整模拟量——左轨高程";
        public string Yggc = "调整模拟量——右轨高程";
        public string Zgpm = "调整模拟量——左轨平面";
        public string Ygpm = "调整模拟量——右轨平面";
        public string Sygc = "模拟调整后的剩余调整量——高程";
        public string Sygddb = "模拟调整后的剩余调整量——高低 短波5m";
        public string Sygdcb = "模拟调整后的剩余调整量——高低 长波150m";
        public string Sypmwz = "模拟调整后的剩余调整量——平面位置";
        public string Sygxdb = "模拟调整后的剩余调整量——轨向 短波5m";
        public string Sygxcb = "模拟调整后的剩余调整量——轨向 长波150m";
        public string Syspcg = "模拟调整后的剩余调整量——水平/超高";
        public string Sygj = "模拟调整后的剩余调整量——轨距";
        public string Fjzj = "附加参数——注解";
        public string Fjidh = "附加参数——ID号";
        public string Fjsjcg = "附加参数——设计超高";
        public string Fjsccg = "附加参数——实测超高";
        public string Fjsjgj = "附加参数——设计轨距";
        public string Fjscgj = "附加参数——实测规矩";
        public string Fjsj5mgd = "附加参数——设计5m高低";
        public string Fjsc5mgd = "附加参数——实测5m高低";
        public string Fjsj150mgd = "附加参数——设计150m高低";
        public string Fjsc150mgd = "附加参数——实测150m高低";
        public string Fjsj5mgx = "附加参数——设计5m轨向";
        public string Fjsc5mgx = "附加参数——实测5m轨向";
        public string Fjsj150mgx = "附加参数——设计150m轨向";
        public string Fjsc150mgx = "附加参数——实测150m轨向";
        public string Fjgx = "附加参数——实测150m轨向";
    }
}