/**
* Cesium - https://github.com/AnalyticalGraphicsInc/cesium
*
* Copyright 2011-2017 Cesium Contributors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* Columbus View (Pat. Pend.)
*
* Portions licensed separately.
* See https://github.com/AnalyticalGraphicsInc/cesium/blob/master/LICENSE.md for full licensing details.
*/
define(['./when-8d13db60', './Check-70bec281', './Math-61ede240', './Cartographic-fe4be337', './Cartesian2-85064f09', './BoundingSphere-775c5788', './Cartesian4-5af5bb24', './RuntimeError-ba10bc3e', './WebGLConstants-4c11ee5f', './ComponentDatatype-5862616f', './GeometryAttribute-91704ebb', './PrimitiveType-97893bc7', './FeatureDetection-7bd32c34', './Transforms-b2e71640', './buildModuleUrl-14bfe498', './GeometryAttributes-aacecde6', './AttributeCompression-84a90a13', './GeometryPipeline-f95a0a6f', './EncodedCartesian3-a569cba8', './IndexDatatype-9435b55f', './IntersectionTests-397d9494', './Plane-8390418f', './GeometryOffsetAttribute-ca302482', './VertexFormat-fe4db402', './GeometryInstance-93a01b5d', './EllipsoidRhumbLine-f161e674', './earcut-2.2.1-b404d9e6', './PolygonPipeline-6a35d737', './RectangleGeometryLibrary-fc273e18'], function (when, Check, _Math, Cartographic, Cartesian2, BoundingSphere, Cartesian4, RuntimeError, WebGLConstants, ComponentDatatype, GeometryAttribute, PrimitiveType, FeatureDetection, Transforms, buildModuleUrl, GeometryAttributes, AttributeCompression, GeometryPipeline, EncodedCartesian3, IndexDatatype, IntersectionTests, Plane, GeometryOffsetAttribute, VertexFormat, GeometryInstance, EllipsoidRhumbLine, earcut2_2_1, PolygonPipeline, RectangleGeometryLibrary) { 'use strict';
var positionScratch = new Cartographic.Cartesian3();
var normalScratch = new Cartographic.Cartesian3();
var tangentScratch = new Cartographic.Cartesian3();
var bitangentScratch = new Cartographic.Cartesian3();
var rectangleScratch = new Cartesian2.Rectangle();
var stScratch = new Cartesian2.Cartesian2();
var bottomBoundingSphere = new BoundingSphere.BoundingSphere();
var topBoundingSphere = new BoundingSphere.BoundingSphere();
function createAttributes(vertexFormat, attributes) {
var geo = new GeometryAttribute.Geometry({
attributes : new GeometryAttributes.GeometryAttributes(),
primitiveType : PrimitiveType.PrimitiveType.TRIANGLES
});
geo.attributes.position = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.DOUBLE,
componentsPerAttribute : 3,
values : attributes.positions
});
if (vertexFormat.normal) {
geo.attributes.normal = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.FLOAT,
componentsPerAttribute : 3,
values : attributes.normals
});
}
if (vertexFormat.tangent) {
geo.attributes.tangent = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.FLOAT,
componentsPerAttribute : 3,
values : attributes.tangents
});
}
if (vertexFormat.bitangent) {
geo.attributes.bitangent = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.FLOAT,
componentsPerAttribute : 3,
values : attributes.bitangents
});
}
return geo;
}
function calculateAttributes(positions, vertexFormat, ellipsoid, tangentRotationMatrix) {
var length = positions.length;
var normals = (vertexFormat.normal) ? new Float32Array(length) : undefined;
var tangents = (vertexFormat.tangent) ? new Float32Array(length) : undefined;
var bitangents = (vertexFormat.bitangent) ? new Float32Array(length) : undefined;
var attrIndex = 0;
var bitangent = bitangentScratch;
var tangent = tangentScratch;
var normal = normalScratch;
if (vertexFormat.normal || vertexFormat.tangent || vertexFormat.bitangent) {
for (var i = 0; i < length; i += 3) {
var p = Cartographic.Cartesian3.fromArray(positions, i, positionScratch);
var attrIndex1 = attrIndex + 1;
var attrIndex2 = attrIndex + 2;
normal = ellipsoid.geodeticSurfaceNormal(p, normal);
if (vertexFormat.tangent || vertexFormat.bitangent) {
Cartographic.Cartesian3.cross(Cartographic.Cartesian3.UNIT_Z, normal, tangent);
BoundingSphere.Matrix3.multiplyByVector(tangentRotationMatrix, tangent, tangent);
Cartographic.Cartesian3.normalize(tangent, tangent);
if (vertexFormat.bitangent) {
Cartographic.Cartesian3.normalize(Cartographic.Cartesian3.cross(normal, tangent, bitangent), bitangent);
}
}
if (vertexFormat.normal) {
normals[attrIndex] = normal.x;
normals[attrIndex1] = normal.y;
normals[attrIndex2] = normal.z;
}
if (vertexFormat.tangent) {
tangents[attrIndex] = tangent.x;
tangents[attrIndex1] = tangent.y;
tangents[attrIndex2] = tangent.z;
}
if (vertexFormat.bitangent) {
bitangents[attrIndex] = bitangent.x;
bitangents[attrIndex1] = bitangent.y;
bitangents[attrIndex2] = bitangent.z;
}
attrIndex += 3;
}
}
return createAttributes(vertexFormat, {
positions : positions,
normals : normals,
tangents : tangents,
bitangents : bitangents
});
}
var v1Scratch = new Cartographic.Cartesian3();
var v2Scratch = new Cartographic.Cartesian3();
function calculateAttributesWall(positions, vertexFormat, ellipsoid) {
var length = positions.length;
var normals = (vertexFormat.normal) ? new Float32Array(length) : undefined;
var tangents = (vertexFormat.tangent) ? new Float32Array(length) : undefined;
var bitangents = (vertexFormat.bitangent) ? new Float32Array(length) : undefined;
var normalIndex = 0;
var tangentIndex = 0;
var bitangentIndex = 0;
var recomputeNormal = true;
var bitangent = bitangentScratch;
var tangent = tangentScratch;
var normal = normalScratch;
if (vertexFormat.normal || vertexFormat.tangent || vertexFormat.bitangent) {
for (var i = 0; i < length; i += 6) {
var p = Cartographic.Cartesian3.fromArray(positions, i, positionScratch);
var p1 = Cartographic.Cartesian3.fromArray(positions, (i + 6) % length, v1Scratch);
if (recomputeNormal) {
var p2 = Cartographic.Cartesian3.fromArray(positions, (i + 3) % length, v2Scratch);
Cartographic.Cartesian3.subtract(p1, p, p1);
Cartographic.Cartesian3.subtract(p2, p, p2);
normal = Cartographic.Cartesian3.normalize(Cartographic.Cartesian3.cross(p2, p1, normal), normal);
recomputeNormal = false;
}
if (Cartographic.Cartesian3.equalsEpsilon(p1, p, _Math.CesiumMath.EPSILON10)) { // if we've reached a corner
recomputeNormal = true;
}
if (vertexFormat.tangent || vertexFormat.bitangent) {
bitangent = ellipsoid.geodeticSurfaceNormal(p, bitangent);
if (vertexFormat.tangent) {
tangent = Cartographic.Cartesian3.normalize(Cartographic.Cartesian3.cross(bitangent, normal, tangent), tangent);
}
}
if (vertexFormat.normal) {
normals[normalIndex++] = normal.x;
normals[normalIndex++] = normal.y;
normals[normalIndex++] = normal.z;
normals[normalIndex++] = normal.x;
normals[normalIndex++] = normal.y;
normals[normalIndex++] = normal.z;
}
if (vertexFormat.tangent) {
tangents[tangentIndex++] = tangent.x;
tangents[tangentIndex++] = tangent.y;
tangents[tangentIndex++] = tangent.z;
tangents[tangentIndex++] = tangent.x;
tangents[tangentIndex++] = tangent.y;
tangents[tangentIndex++] = tangent.z;
}
if (vertexFormat.bitangent) {
bitangents[bitangentIndex++] = bitangent.x;
bitangents[bitangentIndex++] = bitangent.y;
bitangents[bitangentIndex++] = bitangent.z;
bitangents[bitangentIndex++] = bitangent.x;
bitangents[bitangentIndex++] = bitangent.y;
bitangents[bitangentIndex++] = bitangent.z;
}
}
}
return createAttributes(vertexFormat, {
positions : positions,
normals : normals,
tangents : tangents,
bitangents : bitangents
});
}
function constructRectangle(rectangleGeometry, computedOptions) {
var vertexFormat = rectangleGeometry._vertexFormat;
var ellipsoid = rectangleGeometry._ellipsoid;
var height = computedOptions.height;
var width = computedOptions.width;
var northCap = computedOptions.northCap;
var southCap = computedOptions.southCap;
var rowStart = 0;
var rowEnd = height;
var rowHeight = height;
var size = 0;
if (northCap) {
rowStart = 1;
rowHeight -= 1;
size += 1;
}
if (southCap) {
rowEnd -= 1;
rowHeight -= 1;
size += 1;
}
size += (width * rowHeight);
var positions = (vertexFormat.position) ? new Float64Array(size * 3) : undefined;
var textureCoordinates = (vertexFormat.st) ? new Float32Array(size * 2) : undefined;
var posIndex = 0;
var stIndex = 0;
var position = positionScratch;
var st = stScratch;
var minX = Number.MAX_VALUE;
var minY = Number.MAX_VALUE;
var maxX = -Number.MAX_VALUE;
var maxY = -Number.MAX_VALUE;
for (var row = rowStart; row < rowEnd; ++row) {
for (var col = 0; col < width; ++col) {
RectangleGeometryLibrary.RectangleGeometryLibrary.computePosition(computedOptions, ellipsoid, vertexFormat.st, row, col, position, st);
positions[posIndex++] = position.x;
positions[posIndex++] = position.y;
positions[posIndex++] = position.z;
if (vertexFormat.st) {
textureCoordinates[stIndex++] = st.x;
textureCoordinates[stIndex++] = st.y;
minX = Math.min(minX, st.x);
minY = Math.min(minY, st.y);
maxX = Math.max(maxX, st.x);
maxY = Math.max(maxY, st.y);
}
}
}
if (northCap) {
RectangleGeometryLibrary.RectangleGeometryLibrary.computePosition(computedOptions, ellipsoid, vertexFormat.st, 0, 0, position, st);
positions[posIndex++] = position.x;
positions[posIndex++] = position.y;
positions[posIndex++] = position.z;
if (vertexFormat.st) {
textureCoordinates[stIndex++] = st.x;
textureCoordinates[stIndex++] = st.y;
minX = st.x;
minY = st.y;
maxX = st.x;
maxY = st.y;
}
}
if (southCap) {
RectangleGeometryLibrary.RectangleGeometryLibrary.computePosition(computedOptions, ellipsoid, vertexFormat.st, height - 1, 0, position, st);
positions[posIndex++] = position.x;
positions[posIndex++] = position.y;
positions[posIndex] = position.z;
if (vertexFormat.st) {
textureCoordinates[stIndex++] = st.x;
textureCoordinates[stIndex] = st.y;
minX = Math.min(minX, st.x);
minY = Math.min(minY, st.y);
maxX = Math.max(maxX, st.x);
maxY = Math.max(maxY, st.y);
}
}
if (vertexFormat.st && (minX < 0.0 || minY < 0.0 || maxX > 1.0 || maxY > 1.0)) {
for (var k = 0; k < textureCoordinates.length; k += 2) {
textureCoordinates[k] = (textureCoordinates[k] - minX) / (maxX - minX);
textureCoordinates[k + 1] = (textureCoordinates[k + 1] - minY) / (maxY - minY);
}
}
var geo = calculateAttributes(positions, vertexFormat, ellipsoid, computedOptions.tangentRotationMatrix);
var indicesSize = 6 * (width - 1) * (rowHeight - 1);
if (northCap) {
indicesSize += 3 * (width - 1);
}
if (southCap) {
indicesSize += 3 * (width - 1);
}
var indices = IndexDatatype.IndexDatatype.createTypedArray(size, indicesSize);
var index = 0;
var indicesIndex = 0;
var i;
for (i = 0; i < rowHeight - 1; ++i) {
for (var j = 0; j < width - 1; ++j) {
var upperLeft = index;
var lowerLeft = upperLeft + width;
var lowerRight = lowerLeft + 1;
var upperRight = upperLeft + 1;
indices[indicesIndex++] = upperLeft;
indices[indicesIndex++] = lowerLeft;
indices[indicesIndex++] = upperRight;
indices[indicesIndex++] = upperRight;
indices[indicesIndex++] = lowerLeft;
indices[indicesIndex++] = lowerRight;
++index;
}
++index;
}
if (northCap || southCap) {
var northIndex = size - 1;
var southIndex = size - 1;
if (northCap && southCap) {
northIndex = size - 2;
}
var p1;
var p2;
index = 0;
if (northCap) {
for (i = 0; i < width - 1; i++) {
p1 = index;
p2 = p1 + 1;
indices[indicesIndex++] = northIndex;
indices[indicesIndex++] = p1;
indices[indicesIndex++] = p2;
++index;
}
}
if (southCap) {
index = (rowHeight - 1) * (width);
for (i = 0; i < width - 1; i++) {
p1 = index;
p2 = p1 + 1;
indices[indicesIndex++] = p1;
indices[indicesIndex++] = southIndex;
indices[indicesIndex++] = p2;
++index;
}
}
}
geo.indices = indices;
if (vertexFormat.st) {
geo.attributes.st = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.FLOAT,
componentsPerAttribute : 2,
values : textureCoordinates
});
}
return geo;
}
function addWallPositions(wallPositions, posIndex, i, topPositions, bottomPositions) {
wallPositions[posIndex++] = topPositions[i];
wallPositions[posIndex++] = topPositions[i + 1];
wallPositions[posIndex++] = topPositions[i + 2];
wallPositions[posIndex++] = bottomPositions[i];
wallPositions[posIndex++] = bottomPositions[i + 1];
wallPositions[posIndex] = bottomPositions[i + 2];
return wallPositions;
}
function addWallTextureCoordinates(wallTextures, stIndex, i, st) {
wallTextures[stIndex++] = st[i];
wallTextures[stIndex++] = st[i + 1];
wallTextures[stIndex++] = st[i];
wallTextures[stIndex] = st[i + 1];
return wallTextures;
}
var scratchVertexFormat = new VertexFormat.VertexFormat();
function constructExtrudedRectangle(rectangleGeometry, computedOptions) {
var shadowVolume = rectangleGeometry._shadowVolume;
var offsetAttributeValue = rectangleGeometry._offsetAttribute;
var vertexFormat = rectangleGeometry._vertexFormat;
var minHeight = rectangleGeometry._extrudedHeight;
var maxHeight = rectangleGeometry._surfaceHeight;
var ellipsoid = rectangleGeometry._ellipsoid;
var height = computedOptions.height;
var width = computedOptions.width;
var i;
if (shadowVolume) {
var newVertexFormat = VertexFormat.VertexFormat.clone(vertexFormat, scratchVertexFormat);
newVertexFormat.normal = true;
rectangleGeometry._vertexFormat = newVertexFormat;
}
var topBottomGeo = constructRectangle(rectangleGeometry, computedOptions);
if (shadowVolume) {
rectangleGeometry._vertexFormat = vertexFormat;
}
var topPositions = PolygonPipeline.PolygonPipeline.scaleToGeodeticHeight(topBottomGeo.attributes.position.values, maxHeight, ellipsoid, false);
topPositions = new Float64Array(topPositions);
var length = topPositions.length;
var newLength = length * 2;
var positions = new Float64Array(newLength);
positions.set(topPositions);
var bottomPositions = PolygonPipeline.PolygonPipeline.scaleToGeodeticHeight(topBottomGeo.attributes.position.values, minHeight, ellipsoid);
positions.set(bottomPositions, length);
topBottomGeo.attributes.position.values = positions;
var normals = (vertexFormat.normal) ? new Float32Array(newLength) : undefined;
var tangents = (vertexFormat.tangent) ? new Float32Array(newLength) : undefined;
var bitangents = (vertexFormat.bitangent) ? new Float32Array(newLength) : undefined;
var textures = (vertexFormat.st) ? new Float32Array(newLength / 3 * 2) : undefined;
var topSt;
var topNormals;
if (vertexFormat.normal) {
topNormals = topBottomGeo.attributes.normal.values;
normals.set(topNormals);
for (i = 0; i < length; i++) {
topNormals[i] = -topNormals[i];
}
normals.set(topNormals, length);
topBottomGeo.attributes.normal.values = normals;
}
if (shadowVolume) {
topNormals = topBottomGeo.attributes.normal.values;
if (!vertexFormat.normal) {
topBottomGeo.attributes.normal = undefined;
}
var extrudeNormals = new Float32Array(newLength);
for (i = 0; i < length; i++) {
topNormals[i] = -topNormals[i];
}
extrudeNormals.set(topNormals, length); //only get normals for bottom layer that's going to be pushed down
topBottomGeo.attributes.extrudeDirection = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.FLOAT,
componentsPerAttribute : 3,
values : extrudeNormals
});
}
var offsetValue;
var hasOffsets = when.defined(offsetAttributeValue);
if (hasOffsets) {
var size = length / 3 * 2;
var offsetAttribute = new Uint8Array(size);
if (offsetAttributeValue === GeometryOffsetAttribute.GeometryOffsetAttribute.TOP) {
offsetAttribute = GeometryOffsetAttribute.arrayFill(offsetAttribute, 1, 0, size / 2);
} else {
offsetValue = offsetAttributeValue === GeometryOffsetAttribute.GeometryOffsetAttribute.NONE ? 0 : 1;
offsetAttribute = GeometryOffsetAttribute.arrayFill(offsetAttribute, offsetValue);
}
topBottomGeo.attributes.applyOffset = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.UNSIGNED_BYTE,
componentsPerAttribute : 1,
values : offsetAttribute
});
}
if (vertexFormat.tangent) {
var topTangents = topBottomGeo.attributes.tangent.values;
tangents.set(topTangents);
for (i = 0; i < length; i++) {
topTangents[i] = -topTangents[i];
}
tangents.set(topTangents, length);
topBottomGeo.attributes.tangent.values = tangents;
}
if (vertexFormat.bitangent) {
var topBitangents = topBottomGeo.attributes.bitangent.values;
bitangents.set(topBitangents);
bitangents.set(topBitangents, length);
topBottomGeo.attributes.bitangent.values = bitangents;
}
if (vertexFormat.st) {
topSt = topBottomGeo.attributes.st.values;
textures.set(topSt);
textures.set(topSt, length / 3 * 2);
topBottomGeo.attributes.st.values = textures;
}
var indices = topBottomGeo.indices;
var indicesLength = indices.length;
var posLength = length / 3;
var newIndices = IndexDatatype.IndexDatatype.createTypedArray(newLength / 3, indicesLength * 2);
newIndices.set(indices);
for (i = 0; i < indicesLength; i += 3) {
newIndices[i + indicesLength] = indices[i + 2] + posLength;
newIndices[i + 1 + indicesLength] = indices[i + 1] + posLength;
newIndices[i + 2 + indicesLength] = indices[i] + posLength;
}
topBottomGeo.indices = newIndices;
var northCap = computedOptions.northCap;
var southCap = computedOptions.southCap;
var rowHeight = height;
var widthMultiplier = 2;
var perimeterPositions = 0;
var corners = 4;
var dupliateCorners = 4;
if (northCap) {
widthMultiplier -= 1;
rowHeight -= 1;
perimeterPositions += 1;
corners -= 2;
dupliateCorners -= 1;
}
if (southCap) {
widthMultiplier -= 1;
rowHeight -= 1;
perimeterPositions += 1;
corners -= 2;
dupliateCorners -= 1;
}
perimeterPositions += (widthMultiplier * width + 2 * rowHeight - corners);
var wallCount = (perimeterPositions + dupliateCorners) * 2;
var wallPositions = new Float64Array(wallCount * 3);
var wallExtrudeNormals = shadowVolume ? new Float32Array(wallCount * 3) : undefined;
var wallOffsetAttribute = hasOffsets ? new Uint8Array(wallCount) : undefined;
var wallTextures = (vertexFormat.st) ? new Float32Array(wallCount * 2) : undefined;
var computeTopOffsets = offsetAttributeValue === GeometryOffsetAttribute.GeometryOffsetAttribute.TOP;
if (hasOffsets && !computeTopOffsets) {
offsetValue = offsetAttributeValue === GeometryOffsetAttribute.GeometryOffsetAttribute.ALL ? 1 : 0;
wallOffsetAttribute = GeometryOffsetAttribute.arrayFill(wallOffsetAttribute, offsetValue);
}
var posIndex = 0;
var stIndex = 0;
var extrudeNormalIndex = 0;
var wallOffsetIndex = 0;
var area = width * rowHeight;
var threeI;
for (i = 0; i < area; i += width) {
threeI = i * 3;
wallPositions = addWallPositions(wallPositions, posIndex, threeI, topPositions, bottomPositions);
posIndex += 6;
if (vertexFormat.st) {
wallTextures = addWallTextureCoordinates(wallTextures, stIndex, i * 2, topSt);
stIndex += 4;
}
if (shadowVolume) {
extrudeNormalIndex += 3;
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 1];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 2];
}
if (computeTopOffsets) {
wallOffsetAttribute[wallOffsetIndex++] = 1;
wallOffsetIndex += 1;
}
}
if (!southCap) {
for (i = area - width; i < area; i++) {
threeI = i * 3;
wallPositions = addWallPositions(wallPositions, posIndex, threeI, topPositions, bottomPositions);
posIndex += 6;
if (vertexFormat.st) {
wallTextures = addWallTextureCoordinates(wallTextures, stIndex, i * 2, topSt);
stIndex += 4;
}
if (shadowVolume) {
extrudeNormalIndex += 3;
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 1];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 2];
}
if (computeTopOffsets) {
wallOffsetAttribute[wallOffsetIndex++] = 1;
wallOffsetIndex += 1;
}
}
} else {
var southIndex = northCap ? area + 1 : area;
threeI = southIndex * 3;
for (i = 0; i < 2; i++) { // duplicate corner points
wallPositions = addWallPositions(wallPositions, posIndex, threeI, topPositions, bottomPositions);
posIndex += 6;
if (vertexFormat.st) {
wallTextures = addWallTextureCoordinates(wallTextures, stIndex, southIndex * 2, topSt);
stIndex += 4;
}
if (shadowVolume) {
extrudeNormalIndex += 3;
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 1];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 2];
}
if (computeTopOffsets) {
wallOffsetAttribute[wallOffsetIndex++] = 1;
wallOffsetIndex += 1;
}
}
}
for (i = area - 1; i > 0; i -= width) {
threeI = i * 3;
wallPositions = addWallPositions(wallPositions, posIndex, threeI, topPositions, bottomPositions);
posIndex += 6;
if (vertexFormat.st) {
wallTextures = addWallTextureCoordinates(wallTextures, stIndex, i * 2, topSt);
stIndex += 4;
}
if (shadowVolume) {
extrudeNormalIndex += 3;
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 1];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 2];
}
if (computeTopOffsets) {
wallOffsetAttribute[wallOffsetIndex++] = 1;
wallOffsetIndex += 1;
}
}
if (!northCap) {
for (i = width - 1; i >= 0; i--) {
threeI = i * 3;
wallPositions = addWallPositions(wallPositions, posIndex, threeI, topPositions, bottomPositions);
posIndex += 6;
if (vertexFormat.st) {
wallTextures = addWallTextureCoordinates(wallTextures, stIndex, i * 2, topSt);
stIndex += 4;
}
if (shadowVolume) {
extrudeNormalIndex += 3;
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 1];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 2];
}
if (computeTopOffsets) {
wallOffsetAttribute[wallOffsetIndex++] = 1;
wallOffsetIndex += 1;
}
}
} else {
var northIndex = area;
threeI = northIndex * 3;
for (i = 0; i < 2; i++) { // duplicate corner points
wallPositions = addWallPositions(wallPositions, posIndex, threeI, topPositions, bottomPositions);
posIndex += 6;
if (vertexFormat.st) {
wallTextures = addWallTextureCoordinates(wallTextures, stIndex, northIndex * 2, topSt);
stIndex += 4;
}
if (shadowVolume) {
extrudeNormalIndex += 3;
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 1];
wallExtrudeNormals[extrudeNormalIndex++] = topNormals[threeI + 2];
}
if (computeTopOffsets) {
wallOffsetAttribute[wallOffsetIndex++] = 1;
wallOffsetIndex += 1;
}
}
}
var geo = calculateAttributesWall(wallPositions, vertexFormat, ellipsoid);
if (vertexFormat.st) {
geo.attributes.st = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.FLOAT,
componentsPerAttribute : 2,
values : wallTextures
});
}
if (shadowVolume) {
geo.attributes.extrudeDirection = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.FLOAT,
componentsPerAttribute : 3,
values : wallExtrudeNormals
});
}
if (hasOffsets) {
geo.attributes.applyOffset = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.UNSIGNED_BYTE,
componentsPerAttribute : 1,
values : wallOffsetAttribute
});
}
var wallIndices = IndexDatatype.IndexDatatype.createTypedArray(wallCount, perimeterPositions * 6);
var upperLeft;
var lowerLeft;
var lowerRight;
var upperRight;
length = wallPositions.length / 3;
var index = 0;
for (i = 0; i < length - 1; i += 2) {
upperLeft = i;
upperRight = (upperLeft + 2) % length;
var p1 = Cartographic.Cartesian3.fromArray(wallPositions, upperLeft * 3, v1Scratch);
var p2 = Cartographic.Cartesian3.fromArray(wallPositions, upperRight * 3, v2Scratch);
if (Cartographic.Cartesian3.equalsEpsilon(p1, p2, _Math.CesiumMath.EPSILON10)) {
continue;
}
lowerLeft = (upperLeft + 1) % length;
lowerRight = (lowerLeft + 2) % length;
wallIndices[index++] = upperLeft;
wallIndices[index++] = lowerLeft;
wallIndices[index++] = upperRight;
wallIndices[index++] = upperRight;
wallIndices[index++] = lowerLeft;
wallIndices[index++] = lowerRight;
}
geo.indices = wallIndices;
geo = GeometryPipeline.GeometryPipeline.combineInstances([
new GeometryInstance.GeometryInstance({
geometry : topBottomGeo
}),
new GeometryInstance.GeometryInstance({
geometry : geo
})
]);
return geo[0];
}
var scratchRectanglePoints = [new Cartographic.Cartesian3(), new Cartographic.Cartesian3(), new Cartographic.Cartesian3(), new Cartographic.Cartesian3()];
var nwScratch = new Cartographic.Cartographic();
var stNwScratch = new Cartographic.Cartographic();
function computeRectangle(rectangle, granularity, rotation, ellipsoid, result) {
if (rotation === 0.0) {
return Cartesian2.Rectangle.clone(rectangle, result);
}
var computedOptions = RectangleGeometryLibrary.RectangleGeometryLibrary.computeOptions(rectangle, granularity, rotation, 0, rectangleScratch, nwScratch);
var height = computedOptions.height;
var width = computedOptions.width;
var positions = scratchRectanglePoints;
RectangleGeometryLibrary.RectangleGeometryLibrary.computePosition(computedOptions, ellipsoid, false, 0, 0, positions[0]);
RectangleGeometryLibrary.RectangleGeometryLibrary.computePosition(computedOptions, ellipsoid, false, 0, width - 1, positions[1]);
RectangleGeometryLibrary.RectangleGeometryLibrary.computePosition(computedOptions, ellipsoid, false, height - 1, 0, positions[2]);
RectangleGeometryLibrary.RectangleGeometryLibrary.computePosition(computedOptions, ellipsoid, false, height - 1, width - 1, positions[3]);
return Cartesian2.Rectangle.fromCartesianArray(positions, ellipsoid, result);
}
/**
* A description of a cartographic rectangle on an ellipsoid centered at the origin. Rectangle geometry can be rendered with both {@link Primitive} and {@link GroundPrimitive}.
*
* @alias RectangleGeometry
* @constructor
*
* @param {Object} options Object with the following properties:
* @param {Rectangle} options.rectangle A cartographic rectangle with north, south, east and west properties in radians.
* @param {VertexFormat} [options.vertexFormat=VertexFormat.DEFAULT] The vertex attributes to be computed.
* @param {Ellipsoid} [options.ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the rectangle lies.
* @param {Number} [options.granularity=CesiumMath.RADIANS_PER_DEGREE] The distance, in radians, between each latitude and longitude. Determines the number of positions in the buffer.
* @param {Number} [options.height=0.0] The distance in meters between the rectangle and the ellipsoid surface.
* @param {Number} [options.rotation=0.0] The rotation of the rectangle, in radians. A positive rotation is counter-clockwise.
* @param {Number} [options.stRotation=0.0] The rotation of the texture coordinates, in radians. A positive rotation is counter-clockwise.
* @param {Number} [options.extrudedHeight] The distance in meters between the rectangle's extruded face and the ellipsoid surface.
*
* @exception {DeveloperError} options.rectangle.north must be in the interval [-Pi/2, Pi/2].
* @exception {DeveloperError} options.rectangle.south must be in the interval [-Pi/2, Pi/2].
* @exception {DeveloperError} options.rectangle.east must be in the interval [-Pi, Pi].
* @exception {DeveloperError} options.rectangle.west must be in the interval [-Pi, Pi].
* @exception {DeveloperError} options.rectangle.north must be greater than options.rectangle.south.
*
* @see RectangleGeometry#createGeometry
*
* @demo {@link https://sandcastle.cesium.com/index.html?src=Rectangle.html|Cesium Sandcastle Rectangle Demo}
*
* @example
* // 1. create a rectangle
* var rectangle = new Cesium.RectangleGeometry({
* ellipsoid : Cesium.Ellipsoid.WGS84,
* rectangle : Cesium.Rectangle.fromDegrees(-80.0, 39.0, -74.0, 42.0),
* height : 10000.0
* });
* var geometry = Cesium.RectangleGeometry.createGeometry(rectangle);
*
* // 2. create an extruded rectangle without a top
* var rectangle = new Cesium.RectangleGeometry({
* ellipsoid : Cesium.Ellipsoid.WGS84,
* rectangle : Cesium.Rectangle.fromDegrees(-80.0, 39.0, -74.0, 42.0),
* height : 10000.0,
* extrudedHeight: 300000
* });
* var geometry = Cesium.RectangleGeometry.createGeometry(rectangle);
*/
function RectangleGeometry(options) {
options = when.defaultValue(options, when.defaultValue.EMPTY_OBJECT);
var rectangle = options.rectangle;
//>>includeStart('debug', pragmas.debug);
Check.Check.typeOf.object('rectangle', rectangle);
Cartesian2.Rectangle.validate(rectangle);
if (rectangle.north < rectangle.south) {
throw new Check.DeveloperError('options.rectangle.north must be greater than or equal to options.rectangle.south');
}
//>>includeEnd('debug');
var height = when.defaultValue(options.height, 0.0);
var extrudedHeight = when.defaultValue(options.extrudedHeight, height);
this._rectangle = Cartesian2.Rectangle.clone(rectangle);
this._granularity = when.defaultValue(options.granularity, _Math.CesiumMath.RADIANS_PER_DEGREE);
this._ellipsoid = Cartesian2.Ellipsoid.clone(when.defaultValue(options.ellipsoid, Cartesian2.Ellipsoid.WGS84));
this._surfaceHeight = Math.max(height, extrudedHeight);
this._rotation = when.defaultValue(options.rotation, 0.0);
this._stRotation = when.defaultValue(options.stRotation, 0.0);
this._vertexFormat = VertexFormat.VertexFormat.clone(when.defaultValue(options.vertexFormat, VertexFormat.VertexFormat.DEFAULT));
this._extrudedHeight = Math.min(height, extrudedHeight);
this._shadowVolume = when.defaultValue(options.shadowVolume, false);
this._workerName = 'createRectangleGeometry';
this._offsetAttribute = options.offsetAttribute;
this._rotatedRectangle = undefined;
this._textureCoordinateRotationPoints = undefined;
}
/**
* The number of elements used to pack the object into an array.
* @type {Number}
*/
RectangleGeometry.packedLength = Cartesian2.Rectangle.packedLength + Cartesian2.Ellipsoid.packedLength + VertexFormat.VertexFormat.packedLength + 7;
/**
* Stores the provided instance into the provided array.
*
* @param {RectangleGeometry} value The value to pack.
* @param {Number[]} array The array to pack into.
* @param {Number} [startingIndex=0] The index into the array at which to start packing the elements.
*
* @returns {Number[]} The array that was packed into
*/
RectangleGeometry.pack = function(value, array, startingIndex) {
//>>includeStart('debug', pragmas.debug);
Check.Check.typeOf.object('value', value);
Check.Check.defined('array', array);
//>>includeEnd('debug');
startingIndex = when.defaultValue(startingIndex, 0);
Cartesian2.Rectangle.pack(value._rectangle, array, startingIndex);
startingIndex += Cartesian2.Rectangle.packedLength;
Cartesian2.Ellipsoid.pack(value._ellipsoid, array, startingIndex);
startingIndex += Cartesian2.Ellipsoid.packedLength;
VertexFormat.VertexFormat.pack(value._vertexFormat, array, startingIndex);
startingIndex += VertexFormat.VertexFormat.packedLength;
array[startingIndex++] = value._granularity;
array[startingIndex++] = value._surfaceHeight;
array[startingIndex++] = value._rotation;
array[startingIndex++] = value._stRotation;
array[startingIndex++] = value._extrudedHeight;
array[startingIndex++] = value._shadowVolume ? 1.0 : 0.0;
array[startingIndex] = when.defaultValue(value._offsetAttribute, -1);
return array;
};
var scratchRectangle = new Cartesian2.Rectangle();
var scratchEllipsoid = Cartesian2.Ellipsoid.clone(Cartesian2.Ellipsoid.UNIT_SPHERE);
var scratchOptions = {
rectangle : scratchRectangle,
ellipsoid : scratchEllipsoid,
vertexFormat : scratchVertexFormat,
granularity : undefined,
height : undefined,
rotation : undefined,
stRotation : undefined,
extrudedHeight : undefined,
shadowVolume : undefined,
offsetAttribute: undefined
};
/**
* Retrieves an instance from a packed array.
*
* @param {Number[]} array The packed array.
* @param {Number} [startingIndex=0] The starting index of the element to be unpacked.
* @param {RectangleGeometry} [result] The object into which to store the result.
* @returns {RectangleGeometry} The modified result parameter or a new RectangleGeometry instance if one was not provided.
*/
RectangleGeometry.unpack = function(array, startingIndex, result) {
//>>includeStart('debug', pragmas.debug);
Check.Check.defined('array', array);
//>>includeEnd('debug');
startingIndex = when.defaultValue(startingIndex, 0);
var rectangle = Cartesian2.Rectangle.unpack(array, startingIndex, scratchRectangle);
startingIndex += Cartesian2.Rectangle.packedLength;
var ellipsoid = Cartesian2.Ellipsoid.unpack(array, startingIndex, scratchEllipsoid);
startingIndex += Cartesian2.Ellipsoid.packedLength;
var vertexFormat = VertexFormat.VertexFormat.unpack(array, startingIndex, scratchVertexFormat);
startingIndex += VertexFormat.VertexFormat.packedLength;
var granularity = array[startingIndex++];
var surfaceHeight = array[startingIndex++];
var rotation = array[startingIndex++];
var stRotation = array[startingIndex++];
var extrudedHeight = array[startingIndex++];
var shadowVolume = array[startingIndex++] === 1.0;
var offsetAttribute = array[startingIndex];
if (!when.defined(result)) {
scratchOptions.granularity = granularity;
scratchOptions.height = surfaceHeight;
scratchOptions.rotation = rotation;
scratchOptions.stRotation = stRotation;
scratchOptions.extrudedHeight = extrudedHeight;
scratchOptions.shadowVolume = shadowVolume;
scratchOptions.offsetAttribute = offsetAttribute === -1 ? undefined : offsetAttribute;
return new RectangleGeometry(scratchOptions);
}
result._rectangle = Cartesian2.Rectangle.clone(rectangle, result._rectangle);
result._ellipsoid = Cartesian2.Ellipsoid.clone(ellipsoid, result._ellipsoid);
result._vertexFormat = VertexFormat.VertexFormat.clone(vertexFormat, result._vertexFormat);
result._granularity = granularity;
result._surfaceHeight = surfaceHeight;
result._rotation = rotation;
result._stRotation = stRotation;
result._extrudedHeight = extrudedHeight;
result._shadowVolume = shadowVolume;
result._offsetAttribute = offsetAttribute === -1 ? undefined : offsetAttribute;
return result;
};
/**
* Computes the bounding rectangle based on the provided options
*
* @param {Object} options Object with the following properties:
* @param {Rectangle} options.rectangle A cartographic rectangle with north, south, east and west properties in radians.
* @param {Ellipsoid} [options.ellipsoid=Ellipsoid.WGS84] The ellipsoid on which the rectangle lies.
* @param {Number} [options.granularity=CesiumMath.RADIANS_PER_DEGREE] The distance, in radians, between each latitude and longitude. Determines the number of positions in the buffer.
* @param {Number} [options.rotation=0.0] The rotation of the rectangle, in radians. A positive rotation is counter-clockwise.
* @param {Rectangle} [result] An object in which to store the result.
*
* @returns {Rectangle} The result rectangle
*/
RectangleGeometry.computeRectangle = function(options, result) {
options = when.defaultValue(options, when.defaultValue.EMPTY_OBJECT);
var rectangle = options.rectangle;
//>>includeStart('debug', pragmas.debug);
Check.Check.typeOf.object('rectangle', rectangle);
Cartesian2.Rectangle.validate(rectangle);
if (rectangle.north < rectangle.south) {
throw new Check.DeveloperError('options.rectangle.north must be greater than or equal to options.rectangle.south');
}
//>>includeEnd('debug');
var granularity = when.defaultValue(options.granularity, _Math.CesiumMath.RADIANS_PER_DEGREE);
var ellipsoid = when.defaultValue(options.ellipsoid, Cartesian2.Ellipsoid.WGS84);
var rotation = when.defaultValue(options.rotation, 0.0);
return computeRectangle(rectangle, granularity, rotation, ellipsoid, result);
};
var tangentRotationMatrixScratch = new BoundingSphere.Matrix3();
var quaternionScratch = new Transforms.Quaternion();
var centerScratch = new Cartographic.Cartographic();
/**
* Computes the geometric representation of a rectangle, including its vertices, indices, and a bounding sphere.
*
* @param {RectangleGeometry} rectangleGeometry A description of the rectangle.
* @returns {Geometry|undefined} The computed vertices and indices.
*
* @exception {DeveloperError} Rotated rectangle is invalid.
*/
RectangleGeometry.createGeometry = function(rectangleGeometry) {
if ((_Math.CesiumMath.equalsEpsilon(rectangleGeometry._rectangle.north, rectangleGeometry._rectangle.south, _Math.CesiumMath.EPSILON10) ||
(_Math.CesiumMath.equalsEpsilon(rectangleGeometry._rectangle.east, rectangleGeometry._rectangle.west, _Math.CesiumMath.EPSILON10)))) {
return undefined;
}
var rectangle = rectangleGeometry._rectangle;
var ellipsoid = rectangleGeometry._ellipsoid;
var rotation = rectangleGeometry._rotation;
var stRotation = rectangleGeometry._stRotation;
var vertexFormat = rectangleGeometry._vertexFormat;
var computedOptions = RectangleGeometryLibrary.RectangleGeometryLibrary.computeOptions(rectangle, rectangleGeometry._granularity, rotation, stRotation, rectangleScratch, nwScratch, stNwScratch);
var tangentRotationMatrix = tangentRotationMatrixScratch;
if (stRotation !== 0 || rotation !== 0) {
var center = Cartesian2.Rectangle.center(rectangle, centerScratch);
var axis = ellipsoid.geodeticSurfaceNormalCartographic(center, v1Scratch);
Transforms.Quaternion.fromAxisAngle(axis, -stRotation, quaternionScratch);
BoundingSphere.Matrix3.fromQuaternion(quaternionScratch, tangentRotationMatrix);
} else {
BoundingSphere.Matrix3.clone(BoundingSphere.Matrix3.IDENTITY, tangentRotationMatrix);
}
var surfaceHeight = rectangleGeometry._surfaceHeight;
var extrudedHeight = rectangleGeometry._extrudedHeight;
var extrude = !_Math.CesiumMath.equalsEpsilon(surfaceHeight, extrudedHeight, 0, _Math.CesiumMath.EPSILON2);
computedOptions.lonScalar = 1.0 / rectangleGeometry._rectangle.width;
computedOptions.latScalar = 1.0 / rectangleGeometry._rectangle.height;
computedOptions.tangentRotationMatrix = tangentRotationMatrix;
var geometry;
var boundingSphere;
rectangle = rectangleGeometry._rectangle;
if (extrude) {
geometry = constructExtrudedRectangle(rectangleGeometry, computedOptions);
var topBS = BoundingSphere.BoundingSphere.fromRectangle3D(rectangle, ellipsoid, surfaceHeight, topBoundingSphere);
var bottomBS = BoundingSphere.BoundingSphere.fromRectangle3D(rectangle, ellipsoid, extrudedHeight, bottomBoundingSphere);
boundingSphere = BoundingSphere.BoundingSphere.union(topBS, bottomBS);
} else {
geometry = constructRectangle(rectangleGeometry, computedOptions);
geometry.attributes.position.values = PolygonPipeline.PolygonPipeline.scaleToGeodeticHeight(geometry.attributes.position.values, surfaceHeight, ellipsoid, false);
if (when.defined(rectangleGeometry._offsetAttribute)) {
var length = geometry.attributes.position.values.length;
var applyOffset = new Uint8Array(length / 3);
var offsetValue = rectangleGeometry._offsetAttribute === GeometryOffsetAttribute.GeometryOffsetAttribute.NONE ? 0 : 1;
GeometryOffsetAttribute.arrayFill(applyOffset, offsetValue);
geometry.attributes.applyOffset = new GeometryAttribute.GeometryAttribute({
componentDatatype : ComponentDatatype.ComponentDatatype.UNSIGNED_BYTE,
componentsPerAttribute : 1,
values: applyOffset
});
}
boundingSphere = BoundingSphere.BoundingSphere.fromRectangle3D(rectangle, ellipsoid, surfaceHeight);
}
if (!vertexFormat.position) {
delete geometry.attributes.position;
}
return new GeometryAttribute.Geometry({
attributes : geometry.attributes,
indices : geometry.indices,
primitiveType : geometry.primitiveType,
boundingSphere : boundingSphere,
offsetAttribute : rectangleGeometry._offsetAttribute
});
};
/**
* @private
*/
RectangleGeometry.createShadowVolume = function(rectangleGeometry, minHeightFunc, maxHeightFunc) {
var granularity = rectangleGeometry._granularity;
var ellipsoid = rectangleGeometry._ellipsoid;
var minHeight = minHeightFunc(granularity, ellipsoid);
var maxHeight = maxHeightFunc(granularity, ellipsoid);
return new RectangleGeometry({
rectangle : rectangleGeometry._rectangle,
rotation : rectangleGeometry._rotation,
ellipsoid : ellipsoid,
stRotation : rectangleGeometry._stRotation,
granularity : granularity,
extrudedHeight : maxHeight,
height : minHeight,
vertexFormat : VertexFormat.VertexFormat.POSITION_ONLY,
shadowVolume : true
});
};
var unrotatedTextureRectangleScratch = new Cartesian2.Rectangle();
var points2DScratch = [new Cartesian2.Cartesian2(), new Cartesian2.Cartesian2(), new Cartesian2.Cartesian2()];
var rotation2DScratch = new GeometryAttribute.Matrix2();
var rectangleCenterScratch = new Cartographic.Cartographic();
function textureCoordinateRotationPoints(rectangleGeometry) {
if (rectangleGeometry._stRotation === 0.0) {
return [0, 0, 0, 1, 1, 0];
}
var rectangle = Cartesian2.Rectangle.clone(rectangleGeometry._rectangle, unrotatedTextureRectangleScratch);
var granularity = rectangleGeometry._granularity;
var ellipsoid = rectangleGeometry._ellipsoid;
// Rotate to align the texture coordinates with ENU
var rotation = rectangleGeometry._rotation - rectangleGeometry._stRotation;
var unrotatedTextureRectangle = computeRectangle(rectangle, granularity, rotation, ellipsoid, unrotatedTextureRectangleScratch);
// Assume a computed "east-north" texture coordinate system based on spherical or planar tricks, bounded by `boundingRectangle`.
// The "desired" texture coordinate system forms an oriented rectangle (un-oriented computed) around the geometry that completely and tightly bounds it.
// We want to map from the "east-north" texture coordinate system into the "desired" system using a pair of lines (analagous planes in 2D)
// Compute 3 corners of the "desired" texture coordinate system in "east-north" texture space by the following in cartographic space:
// - rotate 3 of the corners in unrotatedTextureRectangle by stRotation around the center of the bounding rectangle
// - apply the "east-north" system's normalization formula to the rotated cartographics, even though this is likely to produce values outside [0-1].
// This gives us a set of points in the "east-north" texture coordinate system that can be used to map "east-north" texture coordinates to "desired."
var points2D = points2DScratch;
points2D[0].x = unrotatedTextureRectangle.west;
points2D[0].y = unrotatedTextureRectangle.south;
points2D[1].x = unrotatedTextureRectangle.west;
points2D[1].y = unrotatedTextureRectangle.north;
points2D[2].x = unrotatedTextureRectangle.east;
points2D[2].y = unrotatedTextureRectangle.south;
var boundingRectangle = rectangleGeometry.rectangle;
var toDesiredInComputed = GeometryAttribute.Matrix2.fromRotation(rectangleGeometry._stRotation, rotation2DScratch);
var boundingRectangleCenter = Cartesian2.Rectangle.center(boundingRectangle, rectangleCenterScratch);
for (var i = 0; i < 3; ++i) {
var point2D = points2D[i];
point2D.x -= boundingRectangleCenter.longitude;
point2D.y -= boundingRectangleCenter.latitude;
GeometryAttribute.Matrix2.multiplyByVector(toDesiredInComputed, point2D, point2D);
point2D.x += boundingRectangleCenter.longitude;
point2D.y += boundingRectangleCenter.latitude;
// Convert point into east-north texture coordinate space
point2D.x = (point2D.x - boundingRectangle.west) / boundingRectangle.width;
point2D.y = (point2D.y - boundingRectangle.south) / boundingRectangle.height;
}
var minXYCorner = points2D[0];
var maxYCorner = points2D[1];
var maxXCorner = points2D[2];
var result = new Array(6);
Cartesian2.Cartesian2.pack(minXYCorner, result);
Cartesian2.Cartesian2.pack(maxYCorner, result, 2);
Cartesian2.Cartesian2.pack(maxXCorner, result, 4);
return result;
}
Object.defineProperties(RectangleGeometry.prototype, {
/**
* @private
*/
rectangle : {
get : function() {
if (!when.defined(this._rotatedRectangle)) {
this._rotatedRectangle = computeRectangle(this._rectangle, this._granularity, this._rotation, this._ellipsoid);
}
return this._rotatedRectangle;
}
},
/**
* For remapping texture coordinates when rendering RectangleGeometries as GroundPrimitives.
* This version permits skew in textures by computing offsets directly in cartographic space and
* more accurately approximates rendering RectangleGeometries with height as standard Primitives.
* @see Geometry#_textureCoordinateRotationPoints
* @private
*/
textureCoordinateRotationPoints : {
get : function() {
if (!when.defined(this._textureCoordinateRotationPoints)) {
this._textureCoordinateRotationPoints = textureCoordinateRotationPoints(this);
}
return this._textureCoordinateRotationPoints;
}
}
});
function createRectangleGeometry(rectangleGeometry, offset) {
if (when.defined(offset)) {
rectangleGeometry = RectangleGeometry.unpack(rectangleGeometry, offset);
}
rectangleGeometry._ellipsoid = Cartesian2.Ellipsoid.clone(rectangleGeometry._ellipsoid);
rectangleGeometry._rectangle = Cartesian2.Rectangle.clone(rectangleGeometry._rectangle);
return RectangleGeometry.createGeometry(rectangleGeometry);
}
return createRectangleGeometry;
});